The Power Supply can be installed in the following three different configurations: Configuration Option A) Attached to mountġ) Attach Power Supply Bracket to Ceiling Mount on the right or left side (DO NOT COVER FAN).Ģ) Locate power source and plug the wireless power remote receiver into a 3 conductor, GFCI protected outlet.ģ) Plug the power supply into the wireless receiver outlet.Ĥ) Run the power supply input cord from the power source to where the GCHawk will be mounted.ĥ) Install Ceiling Mount (Refer to Ceiling Mount Installation Section).Ĭonfiguration Option B) Remote (Requires separately purchased Cable Extension)ġ) Locate Power Source and plug the receiver into a 3 conductor, GFCI protected outlet.Ģ) Plug the power supply into the wireless receiver outlet.ģ) From the power source location, connect output cord of the power supply to the output extension (purchased separately).Ĥ) Run the output extension to where the GCHawk will be located.Ĭonfiguration Option C) Above/Inside Ceilingġ) Locate and place the power supply block in the ceiling within 3 feet (1 meter) of the GCHawk mounting location. Install the ceiling mount in a place free from excessive dust and humidity to prevent the lens or optical components of the GCHawk from becoming clouded or dirty.Ħ) Do NOT use excessive force when adjusting the ceiling mount or GCHawk. Excessive temperatures may damage the GCHawk. If the ceiling area is not strong enough, reinforce the area prior to installation.Ĥ) Never modify the ceiling mount, assembly components, or GCHawk.ĥ) Do NOT install the ceiling mount and GCHawk in a location where the operating temperature for the GCHawk may be exceeded.
This may result in damage to or failure of the mount.ģ) Prior to installing the GCHawk mount, make sure the ceiling area is strong enough to hold the GCHawk and mount. Do NOT attempt to mount additional items to the provided mount, as the additional weight may result in damage and/or failure.Ģ) Do NOT install the wall mount in a location where vibration or impact shock may occur. 1) The ceiling mount is designed specifically for mounting a GCHawk to a ceiling.
0 kommentar(er)
